1. This machine is the latest product developed by our company. It completely replaces the products produced by the 200-type pipe stranding machine, especially the 1 + 6 + 1 2 regular stranding products. The output is 200 type pipe stranding machine. 4 . 5 times, while saving energy, small footprint, low noise, etc.
2. The brakes use electromagnetic brakes.
3. The internal tension of the take-up line is controlled by the belt type.
4. Over-line system: With the latest structure, the conductor passes directly from the pay-off reel to the bow belt, and the bow belt is made of spring steel strip. It adopts a unique semi-circular groove design, which is matched with the semi-circular porcelain ring of the bow to avoid Stranded wire scratching and jumping phenomenon caused by wind resistance at high speed operation
6. Safety protection: Each starter door contact is not in place, internal or external disconnection, etc. automatically alarms or cannot be activated on the touch screen.
7. Spindle and cantilever: processed by high-speed dynamic balancer; the rotating body and cover are split and the noise is less than 75 decibels.
8. Electrical control: Humanized operation of touch screen man-machine interface, controlled by P LC program controller + inverter.
9. The bow is made of high quality spring steel strip.
10. Transmission system: The whole machine adopts synchronous belt transmission, the winding distance is accurate, there is no lubrication point inside the machine, the machine is clean, and the secondary line and waste line are not generated due to the pollution of the oil.
11. Change the lay length: linkage with the host, using infinitely variable speed to achieve the customer's changing pitch requirements.
12. Meter counting method: The encoder is synchronized with the host meter.
13. This machine should be used together with Honghui's own 630C stranding machine to complete the 1+6 +12 one-twist effect.
Product parameters and configuration
1. Use: Adapt to the conductor 1+6+ 12 regular conductor stranding.
The pay-off frame is a double-disc line-discharging device with constant tension and no twisting and paying off. It can be used for single-wire pay-off, and can also be used for wire harness pay-off, and the two-disc lines do not interfere with each other, and the wires are separately laid out, and the operation is convenient and effective. Save space.